FRESMAK ARNOLD CLASSIC ÓLEO-DINÁMICA
The first high-pressure vice, launched by Fresmak in 1967.
Characteristics
- Designed for process automation and robotisation.
- Single-acting oleo-dynamic spindle with spring return.
- Monoblock design avoids deformations due to high pressure and provides great robustness.
- Clamping force of up to 80 kN
- Automatic forward and reverse travel of 4 mm.
- Split option available upon request.
+ ARNOLD CLASSIC General Characteristics (Read more)
- Movable spindle: the total length of the vice is determined by the length of the workpiece to be clamped.
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations caused by high pressure and provides great robustness.
- The force applied by the high-pressure spindle is transmitted to the workpiece through the centre of the clamping jaw, utilising 100% of that force.
- Large aperture, up to 375 mm or 845 mm if the workpiece body is in two parts.
- 25/40/50/80 kN clamping force depending on size.
- The ARNOLD CLASSIC spindles can be used independently from the vice as a clamping element in a workholding set up.
- Available in 3 versions: standard, straight, and straight in two parts.
- Optional swivel base
- Optional pressure regulator.
- Available sizes (width):
- 125 / 160 / 200 mm
Clamping Technology
Workholding
Rotary connection at the oil inlet and outlet.
Workholding - Required elements
- Hydraulic unit or single-acting 500 bar pneumo-hydraulic pump with vice-unit connection hose, pressure control switch, safety valve integrated into the unit, and ON-OFF switch.
- Pressure gauge
+ ARNOLD CLASSIC Clamping Technology (Read more)
Special jaws
Fixed nut: supported on a past to push. The spindle travels with the mouth moving.
Movable jaw guided on the outside of the slides.
The movable jaw can be easily removed to facilitate the maintenance of the VICE.
Workholding solutions
-
- Clamping between jaws 1
-
- Clamping between jaws 2
Oleo-dynamic spindle
- Single-acting oleo-dynamic spindle with spring return.
Field of application
By machine type:
- Milling machines
- Drilling machines
- Tapping machines
- Grinding machines
- Boring machines
- Vertical machining centres
- Horizontal machining centres
By workpiece/manufacturing type:
- Clamping of large series
- Large workpieces
- Hard metal workpieces
- High workpieces with side clamping
Supplied set
- Base body
- Oleo-dynamic spindle
- Rotary connection
- 1 set of plain jaws
- 1 handle
- 4 end clamps
- Instruction manual
Do you need more information?
Should you have any questions, please fill in the form below. We will get back to you as soon as possible.
