FRESMAK ARNOLD MAT Mechanical
Fresmak’s most advanced vice for the most demanding machining processes.
Characteristics
- High-pressure mechanical multiplier
- Monoblock design avoids deformations caused by high pressure and provides great robustness.
- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.
- Descending clamping system to avoid lifting of the clamped part.
- Preinstalación sistema punto cero 0-MAK de Fresmak
+ARNOLD MAT General Characteristics (Read more)
- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations caused by high pressure and provides great robustness.
- Particularly suitable for use in both vertical and horizontal machining centres.
- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.
- Possible working positions: supported on the base, on the side, or vertically on the head.
- Side openings for easy cleaning of the inside of the vices.
- Can be clamped to the table using either the four standard clamps supplied or four screws through the inside of the vice.
- 25/40/50 kN clamping force, depending on the size.
- Available sizes (width):
- 90 / 125 / 160 / 200mm
Clamping Technology
Clamping
2 clamping options: interior and exterior clamping.
+ ARNOLD MAT Clamping Technology (Read more)
Special jaws
The ARNOLD MAT vices offer the possibility to work with machined soft jaws according to the geometry of the workpiece.
Semi-sphere
The ARNOLD MAT vices have a descending clamping system to prevent the clamped part from lifting. This is a semi-sphere installed between the movable jaw and the spindle shoe.
When the clamping force is applied via the spindle, the pressure is split in two directions, one of which pulls the workpiece downwards.
Workholding solutions
-
- Clamping between jaws
-
- Top clamping 1
-
- Top clamping 2
-
- Inner clamping 1
-
- Inner clamping 2
Mechanical spindle
- Force multiplication is performed by means of a mechanical spindle.
- Highly durable
- Low maintenance
- Clamping force of up to 50 kN
Field of application
By machine type:
- Milling machines
- Drilling machines
- Tapping machines
- Grinding machines
- Boring machines
- Vertical machining centres
- Horizontal machining centres
By workpiece/manufacturing type:
- Clamping of 1 workpiece
- Large workpieces
- Hard metal workpieces
- High workpieces with side clamping
Supplied set
- Base body
- Mechanical spindle
- 1 set of plain jaws
- 1 handle
- 4 end clamps
- Instruction manual
Do you need more information?
Should you have any questions, please fill in the form below. We will get back to you as soon as possible.
