FRESMAK ARNOLD TWIN Hydraulic
The most advanced double clamping vice on the market; perfect for medium and long series.
Characteristics
- High-pressure hydraulic multiplier
- Enables two workpieces to be clamped simultaneously.
- Possible working positions: supported on the base, on the side, or vertically on the head.
- Preinstalación sistema punto cero 0-MAK de Fresmak
+ ARNOLD TWIN General Characteristics (Read more)
- Suitable for use in vertical and horizontal machining centres.
- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.
- Side openings for easy cleaning of the inside of the vices.
- 25 and 50 kN clamping force according to type.
- Available sizes (width):
- 90 / 125mm
Clamping Technology
Enveloping clamping
+ Tecnología de amarre ARNOLD TWIN (leer más)
Bocas especiales
Posibilidad de amarrar dos piezas a la vez con una diferencia de tamaño entre sí de 3 mm o una sola pieza.
Tienen la posibilidad de trabajar con bocas mecanizadas según lo exija la geometría de la pieza.
Para amarrar una sola pieza, colocarla en la estación II (la más alejada de la manilla)
Third Hand Mechanism
Function that enables you to independently clamp first one workpiece and then the other, which facilitates its placement, especially in the vertical position.
3rd Hand Operation: Turn the handle to bring the moveable jaw I towards the workpiece situated in station I until it is clamped.
Maintaining the turn, bring moveable jaw II towards the workpiece situated in station II until it is clamped.
Continue with the turn, activate the multiplier, and start to clamp with high pressure.
Clamping options
Function that enables you to independently clamp first one workpiece and then the other, which facilitates its placement, especially in the vertical position.
3rd Hand Operation: Turn the handle to bring the moveable jaw I towards the workpiece situated in station I until it is clamped.
Maintaining the turn, bring moveable jaw II towards the workpiece situated in station II until it is clamped.
Continue with the turn, activate the multiplier, and start to clamp with high pressure.
-
- Clamping between two-piece jaws
-
- Clamping between single piece jaws
-
- Clamping of two workpieces with stepped jaws
-
- Clamping of one workpiece with stepped jaw
-
- Clamping of one large workpiece
-
- Clamping of one large workpiece between stepped jaws
Hydraulic spindle
- Force multiplication is carried out using a high-pressure hydraulic spindle.
Field of application
By machine type:
- Milling machines
- Tapping machines
- Grinding machines
- Boring machines
- Vertical machining centres
- Horizontal machining centres
By workpiece/manufacturing type:
- Clamping of 1 workpiece
- Clamping of 2 workpieces
- Large workpieces
- Hard metal workpieces
- Automated work
Supplied set
- Base body
- Oleo-dynamic spindle
- 1 set of hard jaws
- 1 set of movable jaws
- 1 central jaw I (stepped)
- 1 central jaw II (block)
- 1 handle
- 4 end clamps
- Instruction manual
